Xbox Red Lights Flashing

Xbox red lights flashing are a sign of something wrong with the console. These lights, located around the power button are divided into four segments. The upper semi circle has two segments that are understood to be numbered as 1 (top left hand) and 2 (top right hand). Number 3 (bottom left hand) and 4 (bottom right hand) are the two segments of the lower semi circle.

Xbox red lights flashing have a meaning to it. It may be a case that only one segment is flashing or two or three or even all four at a time. The sequence of flashing, known as error codes, signifies different problems.

Hereunder is a guide to help you understand the error that different sequences signify when you see the Xbox red lights flashing.

Click Here to Fix Your Xbox 360 In 1 Hour Now !

• Segments 1 and 3 flashing red ? this means overheating. The Xbox ‘freezes’ and no button except the power button functions. Let the console cool and check the vents for free flow of air.
• Segment 1, 3 and 4 flashing red ? general hardware failure is indicated. This requires opening up the console and changing the GPU X-shaped clamps. In most cases the processor clamps too have to be changed.
• All four segments flashing red ? means that the AV cable is not being detected. Reconnect or change the AV cable.
• Segment 4 flashing red ? indicates hardware failure. You need additional information.

Besides the Xbox red lights flashing and signaling danger there are also error codes that are displayed on the screen. Each code signifies specific hardware failure information. The following information may be helpful in understanding the meaning of these codes.

• Hard Drive Errors: E79, E69. E68 and E67. Indicate problem with the hard drive: either with the connection to the hard drive or the hard drive itself. Take out the hard drive and try playing without it.

• AV Cable Error: E74. Indicates problem with the AV cable. Change the AV cable and if the cable is known to be in good condition the problem lies with the scaler chip. Very rarely the problem may be with the GPU.

• General Hardware Errors: E73 ? Indicates problem with the Ethernet port.

• Dashboard Update Error: E71. Shows during or immediately after the booting animation. You need to reset the console but if that does not work you have no other option than sending the console to the company for repair.

• Voltage Error: E68. Indicates voltage error. Either the fans are pulling up too much power or there are unnecessary accessories attached to the console.

• DVD Drive Errors: E64, E65 and E66. These indicate DVD timeout, incompatible firmware and DVD without f/w chip. Make sure that the DVD version matches the version that the dashboard can read. Also ensure that the DVD tray is properly closed.

• Unknown Errors: E76 and E72. These errors are still not fully understood

This guide is based mostly on experience of serious gamers who have experienced Xbox red lights flashing on their consoles. This should be used only as a guideline to decide whether you want to send your Xbox to the company for repair or not.

Want to easily fix your xbox 360 in less than 1 hour .. and without spending $140 now?

If the answers to any of the two questions above is a resounding “YES”, then I strongly recommend you check out 3RedLightFix.com .

This essential guide reveals an amazingly simple method to easily fix your xbox 360..guaranteed. Click here to go check it out now!.