Red Rings Of Death

Right from the day the Xbox 360 was launched there have been reports of various problems that have been surfacing during use. While some of them are easily solved by letting the console cool for some time by switching it off or unplugging and re-plugging cords, the three red rings of death remain the most feared of all.

It is natural for game lovers to try to find ways and means of fixing the Xbox 360 console on their own because it the service is costly and sending the console to the company can be pretty frustrating and takes quite some time in shipping and repairs.

Click Here to Fix Your Xbox 360 In 1 Hour Now !

Hereunder are certain things that you should be prepared for. If you are aware of what is store you can quickly get over the three red rings of death problem. It is actually very easy and you can learn the process by referring to a step by step guide.

Think before you leap:
Microsoft actually bought trouble for itself in its hurry to launch Xbox 360 before others. In response to the flak it received it extended all warranties to three years. So if your Xbox 360 experiences the dreaded red rings of death and you have a working warranty the best way is to send it to Microsoft because any attempt to repair it will render the warranty invalid.

The likely cause of red rings of death
The major problem with Xbox 360 is that it gets overheated. The X shaped pieces of metal that hold the heat sink on to the COU and GPU are not bouncy enough allowing the motherboard to warp due to the small wiggle room that is there. The end result is that it restricts proper dispersion of heat. You will need some parts (mostly screws and washers) and tools to fix the problem

Removing the heat sinks
Not only does the heat sink but a lot of other parts need to be removed. The motherboard, the heat sinks, the DVD drive, screws, the plastic case and other parts and place them where these cannot be harmed. And when you are removing the heat sinks you need to place something like a corrugated cardboard over the motherboard to avoid harm caused by accidental slipping the screwdriver blade.

Cleaning the Heat sinks
You will have to remove the thermal gunk collected on the heat sinks. This is the easy part and can be done with a metal scrubber or a cloth dipped in alcohol. Although you have already opened up the whole thing for solving the red rings of death problem you should also remove the gunk on the CPU and GPU also. Scraping it off with a toothpick will do that easily.

Preparing for new screws
This requires you to drill new holes to accommodate new screws.

Thermal paste
Before you reinstall you will also have to put a coat of thermal paste on the CPU and GPU and this can be pretty messy if you use a silver based paste.

Want to easily fix your xbox 360 in less than 1 hour .. and without spending $140 now?

If the answers to any of the two questions above is a resounding “YES”, then I strongly recommend you check out 3RedLightFix.com .

This essential guide reveals an amazingly simple method to easily fix your xbox 360..guaranteed. Click here to go check it out now!.